Transportation

June 16, 2017
990 Views

Transportation

There are different type of concrete transportation and they are listed below. These type of concrete transportation are widely used in all area.

MORTAR PAN:

It is a work serious technique and for the most part utilized for little works. There are no odds of isolation of cement. In hot climate, there is a significant loss of water because of more presentation of cement to condition.

Fig: Pan Mixer

WHEEL BARROW OR HAND CART:

It is regularly utilized on ground level i.e. street development and other comparable structures. Isolation can happen if transportation is done on unpleasant streets, however this issue can be limits if pneumatic tires are utilized.

Fig: Hand cart

 Container AND ROPEWAY:

It is reasonable for works in valley, over high docks and long dam locales. Over the top free fall of cement ought to be maintained a strategic distance from to limit isolation.

Fig: Rope way

BELT CONVEYOR:

It has constrained application because of odds of isolation on soak slants, roller focuses and alters in course of belt. It additionally includes over-introduction of cement to condition.

Fig: Belt conveyor

CHUTE:

It is for the most part utilized for cementing in profound areas. Care ought to be taken that incline ought not to be compliment than 1V:2.5H, generally solid won’t slide down. Be that as it may, workability ought not to be changed to suit the conveyance by chute. In fact it is not a decent technique but rather it is widely utilized as a part of the field.

Fig: Chute

 SKIP AND HOIST:

It is a broadly utilized strategy for elevated structure structures. Cement is nourished into the skip which voyages vertically on rails like a lift. In the wake of releasing, it is ideal to turn over the solid before use to evade isolation.

PUMP AND PIPE-LINE METHOD:

It is the most modern strategy especially appropriate for restricted space or when a substantial amount of cement is to be poured without chilly joints. Pumping of cement should be possible @ 8 to 70 cubic meters for each hour up to a flat separation of 300 meter and vertical separation of 90 meter. Pipe diameter is for the most part 8 to 20 cm and it is made of steel. Plastic or aluminum. The workability for pumped cement ought to have at least 40 to 100 mm of droop or 0.90 to 0.95 compacting variable. At conveyance point the workability might be diminished by 25% because of compaction and this calculate ought to be kept personality while outlining the blend.

Fig: Concrete pump method

Fig: Pipe method

Travel MIXER:

Travel blender is a standout amongst the most prevalent hardware for transporting concrete over a long separation especially in prepared blend solid plant. They are truck mounted having a limit of 4 to 7 cubic meter. There are two varieties. In one, blended cement is transported to the site by keeping it unsettled from the start at a speed differing between 2 to 6 cycles for each moment. In other class, the solid is clustered at the focal grouping plant and blending is done in the truck blender either in travel or instantly before releasing cement at site.

Fig: Truck mixer

You may be interested

Quantity survey for square and rectangular column
Quantity survey
973 views
Quantity survey
973 views

Quantity survey for square and rectangular column

Admin - May 6, 2018

column: The columns are vertical structure which is used to transfer the compression load to bottom. STEPS: First take the…

Quantity survey for RCC footing concrete
Quantity survey
2796 views
Quantity survey
2796 views

Quantity survey for RCC footing concrete

Admin - April 13, 2018

RCC Footing: RCC footing is provided to transfer the load of the entire structure to the sub soil. Center line…

Quantity survey for footing PCC
Quantity survey
1376 views
Quantity survey
1376 views

Quantity survey for footing PCC

Admin - April 7, 2018

Footing PCC Layer: The mixture of cement, fine aggregate, coarse aggregate and water is called plain cement concrete (PCC). This…

Leave a Comment

Your email address will not be published.